THE THIRSTY BIRD Products

Your time is money! Save time, money and the stress of worrying about contaminated drinking water for your flock. Enjoy the peace of mind that comes from knowing that your birds have clean water 24/7 because you are using THE THIRSTY BIRD Products!

THE THIRSTY BIRD

Built with the highest quality material and hand made in the USA. THE THIRSTY BIRD is a revolutionary new way to water your birds. Wall or fence mounted design frees up floor space. Once installed to a potable water source through your faucet (60 pounds water pressure maximum), the internal float system will maintain a 100oz. water reserve. The two stainless steel drinkers at the bottom dispense water when manipulated by the bird. THE THIRSTY BIRD unit will provide enough fresh water for a flock of 12 medium size birds.

Unsure of your water pressure? No problem! Check out our Water Pressure Regulator below.

THE THIRSTY BIRD comes with:

  • THE THIRSTY BIRD assembled as shown.
  • 20ft. " OD Poly Tubing and faucet adapter for easy installation to your faucet. (we offer additional lengths of poly tubing if needed)
  • Lower mounting bracket with screws
  • Instructions (Can also be downloaded HERE)

Dimensions:

  • 31"x15"x4.5" (From bottom of waterer to top of hanger)

The THIRSTY BIRD - $39.99

Qty:
(Click on thumbnail for large view)
Remember, with a little show and tell (pushing the drinkers with your finger) it usually takes birds about two to three weeks to learn how to use the drinkers. In a test with five chickens it took the first hen one week to learn to drink and within four weeks the other four had learned to drink from this drinker. Results will vary and remember to leave your old waterer near to THE THIRSTY BIRD drinker until all your birds have learned to drink from THE THIRSTY BIRD.

WARRANTY INFORMATION: THE THIRSTY BIRD and THE THIRSTY BIRD REMOTE are free from known defects and carry a limited parts warranty for a period of one year from the date of purchase. For full warranty details, please refer to our POLICIES page.

THE THIRSTY BIRD REMOTE

Have more than 12 birds or a second pen? No problem, THE THIRSTY BIRD REMOTE uses the water supply from THE THIRSTY BIRD to accommodate multiple locations. You can link together more than one THIRSTY BIRD REMOTE if you have multiple pens or a large flock. THE THIRSTY BIRD REMOTE can be located up to 80 feet away from THE THIRSTY BIRD main unit. If you have multiple pens or a large flock, you can link together more than one THIRSTY BIRD REMOTE by tapping into the 1/4' OD poly tubing linking The Thirsty Bird to The Thirsty Bird Remote with the included 1/4" barbed tee splitter.

THE THIRSTY BIRD REMOTE comes with:

  • THE THIRSTY BIRD REMOTE drink bar
  • 10ft. 1/4" OD Poly Tubing (we offer additional lengths of poly tubing if needed)
  • 4 Mounting screws and brackets
  • 1/4" barbed poly tube fitting adapter
  • Instructions (Can also be downloaded HERE)

Dimensions:

  • 16" in length

The THIRSTY BIRD REMOTE - $19.99

Qty:

(Click on thumbnail for large view)


(Click on thumbnail for large view)

WARRANTY INFORMATION: THE THIRSTY BIRD and THE THIRSTY BIRD REMOTE are free from known defects and carry a limited parts warranty for a period of one year from the date of purchase. For full warranty details, please refer to our POLICIES page.

THE THIRSTY CHICK

A young bird can easily learn to drink from the 16 oz THIRSTY CHICK for a seamless transition to THE THIRSTY BIRD. THE THIRSTY CHICK, unlike THE THIRSTY BIRD is a stand-alone waterer without a full time continuous water supply. Simply fill with water, put the cap back on, hang above chicks heads with the wire from the cap, and that's it. Remember to check water levels.

In a test with young chicks, they learned to drink from THE THIRSTY CHICK the first day with a little show and tell, (pushing the drinker tips with your fingers). Results may vary.

THE THIRSTY CHICK comes with:

  • 1ft. wire hangar
  • THE THIRSTY CHICK unit

Dimensions:

  • 7.5"x3"

The THIRSTY CHICK - $9.99

Qty:

WATER PRESSURE REGULATOR

Unsure of your water pressure? No problem! Simply attach hose or faucet to one end and attach THE THIRSTY BIRD hose adapter to the other end (as shown in picture). This will ensure THE THIRSTY BIRD unit will work properly with the correct water pressure.
  • Maximum inlet water pressure is 120 PSI to the regulator.
  • Output water pressure is 30 PSI

Dimensions:

  • 3.5"x1.75"

Water Pressure Regulator - $9.99 each

Qty:

(Click on thumbnail for large view)


(Click on thumbnail for large view)


20 feet - 1/4" OD Poly Tubing
Includes two 1/4" hose barb connectors - $4.50

Qty:
(Click on thumbnail for large view)

Replacement 1/4" OD Poly Tube to faucet adapter
for THE THIRSTY BIRD - $1.99 each

Qty:

(Click on thumbnail for large view)


(Click on thumbnail for large view)


Thirsty Bird facebook Thirsty Bird Twitter
Valid HTML 4.01 Transitional Website Created by:
spaceFRCN Digital Imaging
Acceptance Mark
We gladly accept PayPal